High Quality with Bottom Price PTFE Lined Carbon Steel Pipe Big Elbow
short description:
Product Description
Steel-Lined Tetrafluoro Pipe Fittings Design Advantages
Steel lined ptfe pipe design advantages:
Summary: RANA select high performance ptfe powder, formed tube throgh push (extrusion) and molding processing, pipe surface chemical treatment, drainage into seamless steel pipe (liner outer diameter than the inner diameter of steel pipe 1-1.5 mm) expansion tight lining.
Its advantages:
1. Seamless, impact resistance, aging resistance to ensure high quality of products
2. High axial tensile strength.
3. Smooth surface, can support any special-shaped steel lining.
Basic Info
Cross-Section Shape
|
Round
|
Transport Package
|
Welded Steel Shelf
|
Trademark
|
Yihao
|
HS Code
|
3904610000
|
Connection Type
|
Seamless
|
Specification
|
various
|
Origin
|
Jiangsu China
|
Production Capacity
|
5000000
|
Product Parameters
Steel pipes are lined with teflon fittings:
Brand: Yihao
Material: PTFE,CS/SS STEEL
DN: 3/4 "- DN500, 3/4" ~ 20"
Operating temperature :-20ºC ~ 180ºC
Working pressure :0 ~ 2.5mpa
Flange: according to HG/T20592-2009)
** All kinds of optional HG, GB, JB, ANSI, JIS, BS, DIN, etc., support different requirements of standard, optional fixed flange, flexible flange.
Medium features: can transport arbitrary concentration of strong acid, strong alkali, organic solvent, strong oxidant, toxic and other corrosive media, safe transportation.
Note the following points:
1) If the diameter DN≥500mm, they belong to the equipment class.
2) When the negative pressure is used, please specify when ordering, according to the negative pressure resistance process lining.
3) For flanges without special requirements, please refer to the appendix in accordance with hG20592-2009.
4) See table for common pipe fitting parameters. Other non-standard parts, such as eccentric reducer, reducing elbow, etc., can be processed according to user requirements.
5) The pressure of steel-lined F4 and F46 glass cylinder mirrors is < 0.3mpa and the working pressure is ≥ 0.3mpa. It is recommended to use steel-lined PTFE four-way mirrors.
6) Steel lined POLYtetrafluoron molding parts DN≥200, the use of temperature <120℃, the use of pressure -0.02-1.6mpa, according to customer conditions, special design.