Umgangatho ophezulu kunye nexabiso elisezantsi PTFE Lined Carbon Steel Pipe Big Elbow

Umgangatho ophezulu onexabiso elisezantsi PTFE Lined Carbon Steel Pipe Big Elbow Featured Image

inkcazelo emfutshane:

Ulwahlulo lobushushu: ukusebenza okuphezulu kombhobho wobushushu obuphezulu
Ukuhlelwa kweMPa :-0.09 MPa ukuya kwi-2.5 MPa
Isixhobo: PTFE,CS/SS STEEL
Umgangatho :ASTM, GB, JIS, DIN
Ububanzi: Inkxaso yokwenza ngokwezifiso
Isixhobo: PTFE,CS/SS STEEL

QHAGAMSHELANA NGOKU

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ingcaciso yeMveliso

Izinto eziluncedo zoYilo lwemibhobho yeTetrafluoro enentsimbi

Steel lined ptfe kuyilo umbhobho inzuzo:

Isishwankathelo: I-RANA ikhethe ukusebenza okuphezulu kwe-ptfe umgubo, i-tube throgh push (i-extrusion) kunye nokulungiswa kokubumba, unyango lwemichiza yombhobho, i-draining kumbhobho wensimbi ongenamthungo (i-diameter yangaphandle ye-liner kune-diameter yangaphakathi yombhobho wensimbi 1-1.5 mm) ukwandisa umgca oqinileyo.
Izibonelelo zayo:
1. Ukungenamthungo, ukuxhathisa impembelelo, ukuchasana nokuguga ukuqinisekisa umgangatho ophezulu weemveliso
2. Amandla aphezulu e-axial tensile.
3. Umphezulu ogudileyo, unokuxhasa nayiphi na intsimbi yensimbi ekhethekileyo.

Umgangatho oPhezulu-ngeXabiso-elisezantsi-PTFE-Line-Carbon-Steel-Pipe-Bi(11)

Umgangatho ophezulu-kunye-ngeXabiso-elisezantsi-PTFE-Lined-Carbon-Steel-Pipe-Bi(12)

Umgangatho ophezulu-kunye-ngeXabiso-ezantsi-PTFE-Lined-Carbon-Steel-Pipe-Big-Elbow11

Umgangatho ophezulu-kunye-ngeXabiso-elisezantsi-PTFE-Lined-Carbon-Steel-Pipe-Big-Elbow1123

Ulwazi olusisiseko

Imilo yeCandelo elinqamlezileyo	Umjikelo
Ipakethe yezoThutho	IShelufu yeNsimbi eWelded
Uphawu lokuthengisa	Yihao
Ikhowudi ye-HS	3904610000

Uhlobo loQhagamshelwano	Ayinamthungo
Inkcazo	ezahlukeneyo
Imvelaphi	Jiangsu China
Isakhono seMveliso	5000000

IiParameters zeMveliso

Imibhobho yentsimbi ifakwe kwi-teflon fittings:
Igama: Yihao
Isixhobo: PTFE,CS/SS STEEL
DN: 3/4 "- DN500, 3/4" ~ 20"
Ubushushu bokusebenza :-20ºC ~ 180ºC
Uxinzelelo lokusebenza: 0 ~ 2.5mpa
Flange: ngokutsho HG/T20592-2009)

** Zonke iintlobo ze-HG ezikhethiweyo, i-GB, i-JB, i-ANSI, i-JIS, i-BS, i-DIN, njl., zixhasa iimfuno ezahlukeneyo zomgangatho, i-flange ekhethiweyo yokuzikhethela, i-flexible flange.
Iimpawu eziPhakathi: inokuthutha ukuxinwa okungafunekiyo kwe-asidi eyomeleleyo, i-alkali eyomeleleyo, i-solvent ye-organic, i-oxidant eyomeleleyo, i-toxic kunye nezinye izinto ezidliwayo, ukuthutha okukhuselekileyo.

Qaphela ezi ngongoma zilandelayo:
1) Ukuba i-diameter DN≥500mm, bangabeklasi yezixhobo.
2) Xa uxinzelelo olubi lusetyenziswa, nceda ucacise xa uyala, ngokuhambelana nenkqubo yokumelana noxinzelelo olubi.
3) Kwiiflange ngaphandle kweemfuno ezizodwa, nceda ubhekisele kwisihlomelo ngokuhambelana ne-hG20592-2009.
4) Jonga itheyibhile kwiiparamitha eziqhelekileyo zokulinganisa umbhobho.Ezinye iindawo ezingezizo ezisemgangathweni, ezifana ne-eccentric reducer, ukunciphisa i-elbow, njl., zinokucutshungulwa ngokweemfuno zomsebenzisi.
I-5) Uxinzelelo lwe-steel-lined F4 kunye ne-F46 glass cylinder mirrors <0.3mpa kunye noxinzelelo lokusebenza ≥ 0.3mpa.Kucetyiswa ukuba kusetyenziswe izibuko ze-PTFE ezine-steel-lined.
I-6) I-Steel lined POLYtetrafluoron molding parts DN≥200, ukusetyenziswa kweqondo lokushisa <120℃, ukusetyenziswa koxinzelelo -0.02-1.6mpa, ngokwemiqathango yabathengi, uyilo olukhethekileyo.