Boleng bo Phahameng ka Theko e tlase PTFE Lined Carbon Steel Pipe Big Elbow

tlhaloso e khuts'oane:

Sehlopha sa mocheso: ts'ebetso e phahameng ea phaephe ea mocheso o phahameng
Sehlopha sa MPa : -0.09 MPa ho 2.5 MPa
lintho tse bonahalang: PTFE,CS/SS TŠEPILE
E tloaelehileng: ASTM, GB, JIS, DIN
Diameter: Ts'ehetso ea tlhophiso
lintho tse bonahalang: PTFE,CS/SS TŠEPILE

TS'ELISO HONA

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

Melemo ea Moqapi oa Meetso ea Lipeipi tsa Tetrafluoro tse nang le Mehala ea tšepe

Melemo ea moralo oa phala ea tšepe ea ptfe:

Kakaretso: RANA khetha ts'ebetso e phahameng ea ptfe phofo, e entsoeng ka tube throgh push (extrusion) le ts'ebetso ea ho bopa, phekolo ea lik'hemik'hale ea phala holim'a metsi, ho ntša metsi ka har'a phala ea tšepe e sa tsitsang (bophara ba ka ntle ho feta bophara bo ka hare ba phala ea tšepe ea 1-1.5 mm) ho atolosa lesela le thata.
Melemo ea eona:
1. Seamless, ho hanyetsa tšusumetso, ho hanyetsa botsofali ho netefatsa boleng bo phahameng ba lihlahisoa
2. Matla a phahameng a axial tensile.
3. Sebaka se boreleli, se ka tšehetsa lesela leha e le lefe la tšepe le nang le sebōpeho se khethehileng.

Boleng-Boholo-bo-Bottom-PTFE-Lined-Carbon-Steel-Pipe-Bi(11)

Boleng-Boholo-bo-Bottom-PTFE-Lined-Carbon-Steel-Pipe-Bi(12)

Theko ea boleng bo holimo-le-Bottom-PTFE-Lined-Carbon-Steel-Pipe-Big-Elbow11

Theko ea boleng bo holimo-le-Bottom-PTFE-Lined-Carbon-Steel-Pipe-Big-Elbow1123

Lintlha tsa Motheo

Sebopeho sa Cross-Section	Ratoa
Sephutheloana sa Lipalangoang	Shelf ea tšepe e cheselitsoeng
Letšoao la khoebo	Yihao
Khoutu ea HS	3904610000

Mofuta oa Khokahano	Seamless
Tlhaloso	tse fapa-fapaneng
Tšimoloho	Jiangsu China
Bokhoni ba Tlhahiso	5000000

Lihlahisoa tsa lihlahisoa

Liphaephe tsa tšepe li kenngoe ka lisebelisoa tsa teflon:
Lebitso: Yihao
lintho tse bonahalang: PTFE,CS/SS TŠEPILE
DN: 3/4 "- DN500, 3/4" ~ 20"
Mocheso oa ho sebetsa: -20ºC ~ 180ºC
Khatello ea ho sebetsa: 0 ~ 2.5mpa
Flange: ho latela HG/T20592-2009)

** Mefuta eohle ea khetho ea HG, GB, JB, ANSI, JIS, BS, DIN, joalo-joalo, e tšehetsa litlhoko tse fapaneng tsa flange e tloaelehileng, ea boikhethelo e tsitsitseng, flange e tenyetsehang.
Likarolo tse mahareng: e ka tsamaisa khatello e matla ea asiti e matla, alkaline e matla, mokelikeli oa tlhaho, oxidant e matla, chefo le mecha e meng e senyang, lipalangoang tse bolokehileng.

Ela hloko lintlha tse latelang:
1) Haeba bophara ba DN≥500mm, ke ba sehlopha sa lisebelisoa.
2) Ha khatello e mpe e sebelisoa, ka kopo hlalosa ha o laela, ho ea ka mokhoa o mobe oa ho hanyetsa lera.
3) Bakeng sa li-flange ntle le litlhoko tse khethehileng, ka kopo sheba sehlomathiso ho latela hG20592-2009.
4) Sheba tafole bakeng sa liparamente tse tloaelehileng tsa ho kenya liphaephe.Likarolo tse ling tseo e seng tsa maemo, joalo ka eccentric reducer, ho fokotsa setsoe, joalo-joalo, li ka sebetsoa ho latela litlhoko tsa mosebelisi.
5) Khatello ea liipone tsa li-cylinder tse entsoeng ka tšepe tsa F4 le F46 ke <0.3mpa le khatello ea ho sebetsa ke ≥ 0.3mpa.Ho khothalletsoa ho sebelisa liipone tsa litsela tse 'nè tsa PTFE tse entsoeng ka tšepe.
6) Steel lined POLYtetrafluoron molding likarolo DN≥200, tšebeliso ea mocheso <120℃, tšebeliso ea khatello -0.02-1.6mpa, ho ea ka maemo a bareki, moralo o khethehileng.