Babban inganci tare da farashin ƙasa PTFE Layin Carbon Karfe bututu Big gwiwar hannu
taƙaitaccen bayanin:
Bayanin Samfura
Fa'idodin Zane-zane na Tetrafluoro Bututu Mai Layi-karfe
Karfe liyi ptfe bututu zane abũbuwan amfãni:
Summary: RANA zaži high yi ptfe foda, kafa tube ta tura (extrusion) da gyare-gyaren aiki, bututu surface sinadaran magani, magudanun ruwa a cikin sumul karfe bututu (liner m diamita fiye da ciki diamita na karfe bututu 1-1.5 mm) fadada m rufi.
Amfaninsa:
1. Mara kyau, juriya mai tasiri, juriya na tsufa don tabbatar da ingancin samfurori
2. Ƙarfin ƙarfin axial mai ƙarfi.
3. Smooth surface, zai iya tallafawa duk wani nau'i na musamman na karfe.
Bayanan asali
| Siffar Sashen Ketare | Zagaye |
| Kunshin sufuri | Welded Karfe Shelf |
| Alamar kasuwanci | Yihao |
| HS Code | Farashin 3904610000 |
| Nau'in Haɗi | M |
| Ƙayyadaddun bayanai | daban-daban |
| Asalin | Jiangsu China |
| Ƙarfin samarwa | 5000000 |
Sigar Samfura
An lika bututun ƙarfe da kayan aikin teflon:
Marka: Yihao
Abu: PTFE, CS/SS STEEL
DN: 3/4 "- DN500, 3/4" ~ 20"
Yanayin aiki: -20ºC ~ 180ºC
Matsin aiki: 0 ~ 2.5mpa
Flange: bisa ga HG/T20592-2009)
** Duk nau'ikan HG, GB, JB, ANSI, JIS, BS, DIN, da sauransu, suna goyan bayan buƙatu daban-daban na daidaitattun, ƙayyadaddun flange na zaɓi, flange mai sassauƙa.
Matsakaici fasali: na iya ɗaukar sabani maida hankali na karfi acid, karfi alkali, Organic kaushi, karfi oxidant, mai guba da sauran m kafofin watsa labarai, lafiya sufuri.
Ka lura da abubuwa masu zuwa:
1) Idan diamita DN≥500mm, sun kasance a cikin kayan aiki aji.
2) Lokacin da aka yi amfani da matsa lamba mara kyau, da fatan za a ƙayyade lokacin yin oda, bisa ga tsarin tsarin juriya mara kyau.
3) Don flanges ba tare da buƙatun musamman ba, da fatan za a koma zuwa shafi daidai da hG20592-2009.
4) Duba tebur don ma'auni na dacewa da bututu na gama gari.Sauran sassan da ba daidai ba, kamar masu rage eccentric, rage gwiwar gwiwar hannu, da sauransu, ana iya sarrafa su bisa ga buƙatun mai amfani.
5) Matsalolin da aka yi da karfe F4 da F46 gilashin Silinda madubin shine <0.3mpa kuma matsa lamba na aiki shine ≥ 0.3mpa.Ana ba da shawarar yin amfani da madubai na PTFE da aka yi da karfe huɗu.
6) Ƙarfe POLYtetrafluoron gyare-gyaren sassa DN≥200, amfani da zafin jiki <120 ℃, amfani da matsa lamba -0.02-1.6mpa, bisa ga abokin ciniki yanayi, musamman zane.
