page_banner1

Horizontal Storage Tank Lined With PTFE Sheet For Chemical Processing Made In China

short description:

Temperature classification: high quality high temperature pipe
MPa Classification :-0.09 MPa to 2.5 MPa
Material: PTFE,CS/SS STEEL
Standard :ASTM, GB, DIN,JIS
Diameter: customized sizes
Material: PTFE,CS/SS STEEL


    Product Detail

    Product Tags

    Product Description

     Advantages And Characteristics In The Design Of Steel Lined Tetrafluoride Pipe Fittings
    This RANA is made of high performance ptfe powder, throgh tube is pushed (squeezed) and molded, chemical tube surface is treated, and then discharged into seamless steel tube (outer diameter of liner compared to inner diameter of steel tube 1-1.5 mm) expansion tight lining.
    The product has three characteristics:
    1. Seamless pipe, high performance impact resistance, anti aging.
    2. Axial tensile strength is very good.
    3. The surface of the product is smooth, and each special-shaped steel piece can be lined.

    Basic Info

    Model NO.
    FF-9979
    Connection Type
    Seamless
    Specification
    various
    Origin
    Jiangsu China
    Production Capacity
    5000000
    Cross-Section Shape
    Round
    Transport Package
    Welded Steel Shelf
    Trademark
    Yihao
    HS Code
    3904610000

    Product Parameters

    Teel Pipe Lined PTFE for Pipe Fittings
    Steel pipes are lined with teflon fittings
    Brand: Yihao
    Material: PTFE,CS/SS STEEL
    DN: 3/4 "- DN500, 3/4" ~ 20"
    Operating temperature :-20ºC ~ 180ºC
    Working pressure :0 ~ 2.5mpa
    Flange: according to HG/T20592-2009)
    ** Can be selected with HG, GB, JB, ANSI, JIS, BS, DIN and other standards, can be selected with fixed flanges, flexible flanges.
    Medium: can support the transport of arbitrary concentration of strong acid, strong alkali, organic solvent, strong oxidant, toxic and other corrosive media.

    Note:

    1) When the diameter of the product DN≥500mm, it belongs to the equipment class.
    2) If it is used under negative pressure, the demand should be explained to us when ordering, and then lining according to negative pressure resistance process.
    3) If there is no special requirement for flanges, please refer to the appendix as stipulated in HG20592-2009.
    4) See table for common pipe fitting parameters. Other non-standard parts, such as eccentric reducer, reducing elbow, etc., we can be customized according to user requirements, processing.
    5) The pressure of steel-lined F4 and F46 glass cylinder mirrors is < 0.3mpa, and the pressure in working condition is ≥ 0.3mpa. Customers suggest using steel-lined PTFE four-way mirrors.
    6) Steel lined PTFE molding parts DN≥200, the use of temperature <120℃, the use of pressure -0.02-1.6mpa, can be specially designed according to customer conditions.


  • Previous:
  • Next: