ibe_banner1

Tank nchekwa kwụ ọtọ ejiri mpempe akwụkwọ PTFE kpuchie maka nhazi kemịkalụ emere na China

nkowa nkenke:

Nkewa okpomọkụ: elu mma elu okpomọkụ ọkpọkọ
Nhazi MPa: -0.09 MPa ruo 2.5 MPa
Ihe: PTFE, CS/SS STEEL
Ọkọlọtọ: ASTM, GB, DIN, JIS
Dayameta: ahaziri nha
Ihe: PTFE, CS/SS STEEL


Nkọwa ngwaahịa

Mkpado ngwaahịa

Nkọwa ngwaahịa

Uru na njirimara dị n'ichepụta nchara nchara Tetrafluoride Pipe Fittings
Nke a RANA na-mere nke elu arụmọrụ ptfe ntụ ntụ, throgh tube na-akpali (squeezed) na kpụrụ, chemical tube elu na-emeso, wee hapụ n'ime enweghị nkebi ígwè tube (mpụta dayameta nke liner tụnyere n'ime dayameta nke ígwè tube 1-1.5 mm). mkpuchi mkpuchi mgbasawanye siri ike.
Ngwaahịa ahụ nwere njirimara atọ:
1. ọkpọkọ enweghị nkebi,elu arụmọrụ mmetụta iguzogide, mgbochi ịka nká.
2. Axial tensile ike dị ezigbo mma.
3. Elu nke ngwaahịa ahụ dị mma, na nke ọ bụla n'ụdị ígwè pụrụ iche nwere ike ịdebere.

Ozi ndabere

Ụdị NO.
FF-9979
Ụdị njikọ
Enweghị ntụpọ
Nkọwapụta
dị iche iche
Mmalite
Jiangsu China
Ike mmepụta
5000000
Ọdịdị nke ngalaba gafere
Gburugburu
Ngwungwu njem
welded Steel shelf
Akara ahia
Yihao
Koodu HS
3904610000

Ngwa ngwaahịa

Teel Pipe Lined PTFE maka Ngwakọta Ọkụ
A na-etinye ọkpọkọ ígwè na akwa teflon
Brand: Yihao
Ihe: PTFE, CS/SS STEEL
DN: 3/4 "- DN500, 3/4" ~ 20"
Okpomọkụ na-arụ ọrụ: -20ºC ~ 180ºC
Nrụgide ọrụ: 0 ~ 2.5mpa
Flange: dị ka HG/T20592-2009 si kwuo)
** Enwere ike ịhọrọ ya na HG, GB, JB, ANSI, JIS, BS, DIN na ụkpụrụ ndị ọzọ, enwere ike họrọ ya na flanges edoziri, flanges na-agbanwe agbanwe.
Ọkara: nwere ike na-akwado mbufe nke aka ike ịta nke siri ike acid, siri ike alkali, organic mgbaze, ike oxidant, nsi na ndị ọzọ corrosive media.

Mara:

1) Mgbe dayameta nke ngwaahịa DN≥500mm, ọ bụ nke akụrụngwa klas.
2) Ọ bụrụ na a na-eji ya n'okpuru nrụgide na-adịghị mma, a ga-akọwara anyị ihe achọrọ mgbe a na-enye iwu, wee na-agbanye dịka usoro nkwụsị nrụgide na-adịghị mma.
3) Ọ bụrụ na enweghị ihe pụrụ iche chọrọ maka flanges, biko rụtụ aka na mgbakwunye dị ka akọwapụtara na HG20592-2009.
4) Hụ tebụl maka parampat kwesịrị ekwesị ọkpọkọ.Akụkụ ndị ọzọ na-abụghị ọkọlọtọ, dị ka eccentric reducer, ibelata ikiaka, wdg, anyị nwere ike ahaziri dị ka onye ọrụ chọrọ, nhazi.
5) Nrụgide nke ígwè F4 na F46 iko cylinder mirror bụ <0.3mpa, na nrụgide na ọnọdụ ọrụ bụ ≥ 0.3mpa.Ndị ahịa na-atụ aro ka iji igwe PTFE nwere akara nchara anọ.
6) Steel lined PTFE ịkpụzi akụkụ DN≥200, ojiji nke okpomọkụ <120 ℃, ojiji nke mgbali -0.02-1.6mpa, nwere ike pụrụ iche mere dị ka ahịa ọnọdụ.


  • Nke gara aga:
  • Osote: